Official Luthiers Forum!
http://www-.luthiersforum.com/forum/

Dsighn time 2
http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=5510		 Page 1 of 1
Author:  Michael Dale Payne [ Tue Mar 07, 2006 1:12 pm ]
Post subject: 
Ok I decided to go with outer panels matching the sides. I also decided to do two guitars of similar schemes. One OM cutaway Quilted Maple Sides and back with Quilted Sapele center wedge and my on unintended thin line SJ with Quilted Sapele back and sides and a Quilted Maple center wedge. This pic is from that set.I still don't have my camera back but I scanned this in. binding on this one will be Curly Maple and the Maple side and back with Sapele center wedge the binding will be quilted Sapele

So do these colors go toagther of what?


oops a little bigger than I planed

there that's better MichaelP38783.9111574074
Author:  Terry Stowell [ Tue Mar 07, 2006 2:41 pm ]
Post subject: 
Goldilocks!
Author:  Dave Anderson [ Tue Mar 07, 2006 3:10 pm ]
Post subject: 
WOW Beautiful wood!
Author:  Serge Poirier [ Tue Mar 07, 2006 3:59 pm ]
Post subject: 
WOWWOW WOW
Author:  Cocephus [ Tue Mar 07, 2006 5:19 pm ]
Post subject: 
One thing wrong, man. It isn`t made into a gorgeous guitar yet! Go for it!
Author:  Michael Dale Payne [ Wed Mar 08, 2006 1:00 am ]
Post subject: 
Getting there. both guitars have the rims and blocks built up both backs are joined the top for the Sapelle b/s is joined, still needs rosette,bracing and so on. I am only getting about two hors in the eving to build on them right now. but that will change is a week or ten depending on if I go to China or not.
Author:  old man [ Wed Mar 08, 2006 6:03 am ]
Post subject: 
Two things wrong. It isn't mine.

Beautiful.

Ron
Author:  BlueSpirit [ Wed Mar 08, 2006 6:35 am ]
Post subject: 
That is a beautiful combo. I really like it. Good job there, Michael!
Author:  Michael Dale Payne [ Wed Mar 08, 2006 6:53 am ]
Post subject: 
I am not going to inlay any purfling between the Maple and the Sapele on the back. The seam is flawless and I like the simple look. The large end of the end graft will match the large end of the wedge and taper toward the top, no purfling on the end graft either. The binding will be maple as well. So there will be very smooth contemporary almost craftsman furnisher movement look to it. I will be doing the same on the other guitar with the reverse, Maple back and sides and Sapele wedge and binding. As soon as the first is assembled I will barrow the company camera and post pics.MichaelP38784.6217708333
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/